Raimondi Levelling System supplied by Tilers Tools at showroom. These porcelain planks were being laid one-third brick bonded.
Despite a slight bend in the tiles, lipping was avoided by using the Raimondi Levelling System (RLS) supplied by Tilers Tools. You can see the full range here

PREMIUM QUALITY CLIPS FOR EVERY NEED
R.L.S. has a range of high quality clips (bases) which meets all Tilers Tools’ clients’ needs – here’s some technical stuff!
TECHNICAL FEATURES for Raimondi Levelling System supplied by Tilers Tools
R.L.S. offers several kind of clips suitable for materials of minimum thickness 3 mm and maximum 20 mm (1/8” – 3/4”) and which leave joint between the tiles of 1.5 mm, 3 mm or 4 mm (1/16” – 1/8” – 5/32”).
All R.L.S. clips have the breaking point very close to the plane where the tiles lay (1.2 mm – 3/64”). This means the system can be used without any problem even on very thin tiles (3 mm – 1/8”) since it still remains a gap of 1.8 mm (5/64”) for the grout.

R.L.S. clips are made with premium quality plastics whose composition has been severely tested to ensure the perfect balance between elasticity and resistance.
R.L.S. clips are available in a various packaging (from 100 and up to 2,000 pieces) to best fit the needs and consumption of each job site..
The RLS is suitable for all tile installations – this picture is of the Raimondi Levelling System supplied by Tilers Tools at showroom – shop floors, factories, car showrooms are all ideal locations.
Shopfitters, contractors and architects are all specifiying Tilers Tools as the only authorised supplier of Ramondi equipment in the UK.
All the models of the R.L.S. clips use the same wedge and the same pliers.
The pliers are, of course, also available on the tilers tools website here
and there’s a great video on youtube of theRaimondi Levelling System supplied by Tilers Tools at showroom – just click below or here
Raimondi Levelling System supplied by Tilers Tools at showroom
Now introducing the New VITE rapid levelling system – saves time and money – Raimondi Levelling System supplied by Tilers Tools at showroom
FEATURES
- Caps are placed on-top of the threads to be tightened
- Caps spin and tightens with just two fingers
- Grip points are established on caps, spin until it reaches the tile
- Tighten caps so it levels itself between spaces which removes lippage
- Once adhesive is set simply remove caps by hitting with a rubber mallet or use the Clip Dozer
- Caps are specially designed with hollow spaces to see grout joints
- Suitable for both tile sides and intersections
- The VITE does not require any tools