FILAPRW200 Pre-Grouting Protector Water Based 1L or 5L


FILAPRW200 is a pre-grouting protector which comes in the choice of 1L or 5L bottles.  Full details below.

Always check on a small area before widespread use.

See technical brochure.  filaprw200-ing

Download brochure.   Fila PRW200

SKU: FILAPRW200 Category: Product functions: , ,


Available in one litre bottle.

CAUTION:  Before using this cleaner, carry out a test on a small surface area to check for any colour changes.  Do not apply externally if rain is forecast

Use for;

  • Terracotta
  • Unpolished stone and agglomerates
  • Quarry tiles

Coverage with one litre;

  • Terracotta rustic Tuscan, polished 15-20m2
  • Terracotta handmade, Spanish, hollow tile, brick  7-10m2
  • Pietra  10-20m2


  • Water-based water-repellent protector against soiling that occurs when fixing. Makes grouting and cleaning easier without altering the material’s appearance.
  • Ideal for absorbent materials such as terracotta, quarry tiles, natural and reconstructed stone and agglomerates.


  • Protects against grouting.
  • It does not affect adhesion between grout and material.
  • It makes cleaning after laying simple.
  • It reduces drying times, making subsequent treatment faster.
  • Does not affect the material’s appearance.
  • Non sacrificial.
  • Easy application.
  • After the application it is possible to apply any kind of protection treatment.
  • This product has extremely low emissions of VOC: certified by GEV and marked by EC1Plus and helps towards gaining credits for the LEED.


  • Certified GEV-EMICODE®

    This product has extremely low VOC emissions: certified GEV-EMICODE® – EC1Plus

  • LEED credits

    This product has extremely low VOC emissions and contributes towards LEED credits.



Method of use

No dilution required: ready to use.

Shake before use. Remove any dust from the surface to be treated.It can also be applied with a flat paintbrush or a fleece pad. Also apply to the edges of the laid material with care. Grouting can be done the day after application, taking care to sponge off the excess before it dries completely. Once thoroughly set, wash the surface using the most suitable detergent for the kind of material used.Assess which type of subsequent protective treatment to complete the protection cycle.FOR PROFESSIONAL USE ONLY:spray the product (airless system) on vertical surfaces until they are saturated and use appropriate PPE, as indicated in the safety information sheet.

Download technical brochure.  filaprw200-ing

Download brochure  Fila PRW200


Additional Information